Product Description
Specifications
Exterior Dimensions: 8'4"W x 8'2"H x 2'8"L
Filters: Blanket Exhaust Media
Fan Diameter: 24"
Fan Specs: 3 HP with 8,000 SCFM @ 1/2" SP
Heavy Duty Construction
Modern Design Allows Conversion to Paint Booth (with optional equipment)
Easy to Install!
These floor model exhaust chambers are designed for exhausting sanding dust, vapors and paint fumes. The dry exhaust filters trap the airborne over spray particles. The clean filtered air is then discharged through the exhaust duct system and into the atmosphere. These chambers are available in a wide range of sizes and designs to meet virtually any production requirements.
Heated air replacement units and intake chambers can be added as well as reduced airflow for automatic spray operations.
Exhaust System Features
A tube axial exhaust fan designed specifically for use in paint spray exhaust chambers powers the airflow through the booth and exhaust stack. All exhaust fans are of non-sparking construction. The motor drive and bearings are sealed from the air stream of the exhaust. Open drip proof (ODP) motors are provided with each unit.
Construction features and quality standards
Chambers are constructed from heavy duty 18-gauge galvanized steel. Structural steel supports are used to add strength and rigidity as necessary.
An optional control panel is available, fire suppression systems are to be supplied by others.
Optional UL/ ETL Listed Control Equipment:
A NEMA12 enclosure pre-wired and tested by RTT for simple hookup. Control panel includes main disconnect switch, class 10 motor protection, light contactor, fuse block, and field wiring terminal strip to easily connect interlock circuits such as door limit switches, light lens limit switch, air solenoid, and fire suppression. The class 10 motor protector offers maximum motor protection by being individually calibrated for the smallest and largest current it can handle and includes automatic ambient temperature compensation over a range of -13F to +140F.
